Advanced electrification · Vehicle R&D
Up to 600 kW · 30,000 rpmMulti-platform electric-machine development
Led the design and development of electric machines and associated control systems up to 600 kW and 30,000 rpm.
PROJECTS
Experience across the electrification frontier.
Selected programme themes demonstrating the breadth of EDRIVE’s engineering leadership. Client-confidential details remain protected.
Industrial automation · Emerson / Nidec
153 Nm peak · 7.5 kWUnimotor HD and Digitax HD
Led and contributed directly to the design, development and industrialisation of the Unimotor HD high-dynamic servo-motor range, covering 0.7–51 Nm rated torque and up to 153 Nm peak, and the associated Digitax HD drive platform spanning 1.5–16 A continuous, up to 48 A peak, 200 V and 400 V classes, and 0.25–7.5 kW.
Electric vehicles · Protean
1,500 Nm · 103 kWPD18 and PD16 in-wheel propulsion
Contributed to the PD18 in-wheel machine for an 18-inch hub, delivering 1,500 Nm and 103 kW; designed and led the PD16 machine for a 16-inch hub, delivering 800 Nm and 40 kW.
Automotive · Jaguar Land Rover
E-machine · InverterX590 electrification platform
Worked on electric-machine and inverter engineering for the X590 platform, supporting requirements, system architecture, electromagnetic and thermal optimisation, integration, cost reduction and validation planning.
Distributed power · Bladon
150,000 rpmMTG12 and MTP40 microturbine platforms
Led electrical-machine and multidisciplinary engineering for the successfully delivered 12 kW MTG12 at 150,000 rpm; contributed to the 40 kW MTP40 across an operating range of approximately 50,000–120,000 rpm.
Renewable energy · NGenTec
1 MW · 6.4 m diameter1 MW modular offshore-wind demonstrator
Contributed to the electromagnetic development of a four-stage, air-cored axial-flux generator operating at approximately 12 rpm—a full-scale development slice of a proposed 6 MW direct-drive machine.
Power switching · Albright
R&D · NPD · ManufactureDC contactors and disconnect systems
Led research, design, product improvement and manufacturing support across low- and high-voltage contactors, motor-reversing products, protected contactors, emergency disconnects and specialist compact solutions.
Aerospace · AMETEK
Safety · ReliabilitySafety-critical electromechanical actuation
Provided advanced technical leadership for brushless electrical machines supporting flight controls, landing gear, flap and slat actuation, and force-feedback applications.
EDEPT SOFTWARE PRODUCTS
Engineering knowledge made operational.
EDEPT software turns proven engineering methods into reusable digital tools for analysis, design exploration and evidence-led decision-making.
EDEPT-EM3
Finite-Element PMSM Analysis
Two-dimensional electromagnetic finite-element analysis for radial-flux surface-PM and interior-PM synchronous machines.
- Static, cogging and transient studies
- Field plots, waveforms and harmonics
- Complete 2D geometry DXF export
EDEPT-EDT
Electric Drivetrain Simulator
An integrated environment for investigating electric-machine, inverter, DC-link and control interaction across drivetrain operating points.
- Operating-point simulation
- dq and phase waveforms
- Harmonic and voltage-limit analysis
EDEPT-EV1
Electric Vehicle System Simulator
A vehicle-level engineering platform for performance, energy-consumption and drive-cycle studies using connected powertrain and vehicle models.
- Drive-cycle simulation
- Energy and range studies
- System sizing and trade-offs
EDEPT-MDT1
Mechanical Drivetrain Rotor Dynamics
Preliminary rotor-dynamic screening for stepped shafts, rigid disks, linear bearings, modal behaviour and synchronous critical speeds.
- Damped modal screening
- Campbell diagrams
- Critical-speed estimates
EDEPT-EM1
Electric Machine Design & Simulation
A transparent engineering tool for machine geometry, winding definition and corrected ideal-sine electromagnetic performance studies.
- Geometry and winding design
- Electromagnetic simulation
- Early-stage design verification
EDEPT-EM2
Detailed Analytical PMSM Simulator
A controlled Windows platform for detailed permanent-magnet machine analysis using independent subdomain informed and classical two dimensional calculation methods.
- Spatial and temporal field harmonics
- Flux, voltage, stress and torque evidence
- EM1 aligned machine definition
EDDI-FMEA Platform
Governed Engineering FMEA
An EDEPT-level, cross-domain platform for product structures, failure networks, controlled engineering changes, independent review and traceable baselines.
- Cross-domain FMEA workspace
- Role-governed review lifecycle
- Baselines, evidence and audit trail
One secure account for the EDEPT suite.
Open Software Portal ↗Create an account, sign in and access approved software releases and downloads.
SELECTED ORGANISATIONS
AMETEK · Bowman Power · Bladon Micro Turbine · Jaguar Land Rover · Ricardo · ZF Group · Protean Electric · Emerson Industrial Automation
START A CONVERSATION
Bring us the challenge others call difficult.
Speak directly with a senior engineer about your electrification programme.
enquiries@eddesign.co.uk ↗